Gravity Wiki


771pages on
this wiki
Add New Page
Talk0 Share


File:Soviet Union stamp 1987 CPA 5891.jpg

A tokamak is a machine producing a toroidal magnetic field for confining a plasma. It is one of several types of magnetic confinement devices, and it is one of the most-researched candidates for producing controlled thermonuclear fusion power.

The term Tokamak is a transliteration of the Russian word Токамак which itself is an acronym made from the Russian words: "тороидальная камера с магнитными катушками" (toroidal'naya kamera s magnitnymi katushkami) — toroidal chamber with magnetic coils (possibly Tochamac). It was invented in the 1950s by Soviet physicists Igor Yevgenyevich Tamm and Andrei Sakharov (who had been inspired by an original idea of "Oleg Lavrentyev").

The tokamak is characterized by azimuthal (rotational) symmetry and the use of the plasma-borne electric current to generate the helical component of the magnetic field necessary for stable equilibrium. This can be contrasted to another toroidal magnetic confinement device, the stellarator, which has a discrete (e.g. fivefold) rotational symmetry and in which all of the confining magnetic fields are produced by external coils with a negligible electric current flowing through the plasma.

History Edit

Although nuclear fusion research began soon after World War II, the programs were initially classified. It was not until after the 1955 United Nations International Conference on the Peaceful Uses of Atomic Energy in Geneva that programs were declassified and international scientific collaboration could take place.

Experimental research of tokamak systems started in 1956 in Kurchatov Institute, Moscow by a group of Soviet scientists led by Lev Artsimovich. The group constructed the first tokamaks, the most successful of them being T-3 and its larger version T-4. T-4 was tested in 1968 in Novosibirsk, conducting the first ever quasistationary thermonuclear fusion reaction.[1]

In 1968, at the third IAEA International Conference on Plasma Physics and Controlled Nuclear Fusion Research at Novosibirsk, Soviet scientists announced that they had achieved electron temperatures of over 1000 eV in a tokamak device. This stunned British and American scientists, who were far away from reaching that benchmark. They remained suspicious until tests were done with laser scattering a few years later, confirming the original temperature measurements.

Since this performance was far superior to any obtained in their existing devices, most fusion research programs quickly switched to using tokamaks. The tokamak continues to be the most promising device for generating net power from nuclear fusion, reflected in the design of the next generation ITER device.[dubious ]

Toroidal design Edit

Tokamak fields lg

Tokamak magnetic field and current

Ions and electrons in the centre of a fusion plasma are at very high temperatures, and have correspondingly large velocities. In order to maintain the fusion process, particles from the hot plasma must be confined in the central region, or the plasma will rapidly cool. Magnetic confinement fusion devices exploit the fact that charged particles in a magnetic field feel a Lorentz force and follow helical paths along the field lines.

Early fusion research devices were variants on the Z-pinch and used electrical current to generate a poloidal magnetic field to contain the plasma along a linear axis between two points. Researchers discovered that plasmas confined in a toroidal shape (see figure; top graphic), in which the magnetic lines run parallel to the axis of the toroid, are prone to rapid instabilities and quickly lose confinement. The tokamak and the similar stellarator designs combine a poloidal field (see figure; the center graphic shows the poloidal field) with the toroidal field to stabilize the plasma, making sustained fusion burn feasible. The particles stream parallel (but not perpendicular) to the magnetic field; in a toroidal-poloidal magnetic field, particles twist in a helical path along the toroidal axis (see figure; bottom graphic).

Plasma heatingEdit

In an operating fusion reactor, part of the energy generated will serve to maintain the plasma temperature as fresh deuterium and tritium are introduced. However, in the startup of a reactor, either initially or after a temporary shutdown, the plasma will have to be heated to its operating temperature of greater than 10 keV (over 100 million degrees Celsius). In current tokamak (and other) magnetic fusion experiments, insufficient fusion energy is produced to maintain the plasma temperature.

Ohmic heatingEdit

Since the plasma is an electrical conductor, it is possible to heat the plasma by inducing a current through it; in fact, the induced current that heats the plasma usually provides most of the poloidal field. The current is induced by slowly increasing the current through an electromagnetic winding linked with the plasma torus: the plasma can be viewed as the secondary winding of a transformer. This is inherently a pulsed process because there is a limit to the current through the primary (there are also other limitations on long pulses). Tokamaks must therefore either operate for short periods or rely on other means of heating and current drive. The heating caused by the induced current is called ohmic (or resistive) heating; it is the same kind of heating that occurs in an electric light bulb or in an electric heater. The heat generated depends on the resistance of the plasma and the current. But as the temperature of heated plasma rises, the resistance decreases and ohmic heating becomes less effective. It appears that the maximum plasma temperature attainable by ohmic heating in a tokamak is 20-30 million degrees Celsius. To obtain still higher temperatures, additional heating methods must be used.

Neutral-beam injectionEdit

Neutral-beam injection involves the introduction of high-energy (rapidly moving) atoms into the ohmically-heated, magnetically-confined plasma. The atoms are ionized as they pass through the plasma and are trapped by the magnetic field. The high-energy ions then transfer part of their energy to the plasma particles in repeated collisions, increasing the plasma temperature.

Magnetic compressionEdit

A gas can be heated by sudden compression. In the same way, the temperature of a plasma is increased if it is compressed rapidly by increasing the confining magnetic field. In a tokamak system this compression is achieved simply by moving the plasma into a region of higher magnetic field (i.e., radially inward). Since plasma compression brings the ions closer together, the process has the additional benefit of facilitating attainment of the required density for a fusion reactor.

Radio-frequency heatingEdit

File:Gyrotron plateforme.jpg

High-frequency electromagnetic waves are generated by oscillators (often by gyrotrons or klystrons) outside the torus. If the waves have the correct frequency (or wavelength) and polarization, their energy can be transferred to the charged particles in the plasma, which in turn collide with other plasma particles, thus increasing the temperature of the bulk plasma. Various techniques exist including electron cyclotron resonance heating (ECRH) and ion cyclotron resonance heating.

Tokamak coolingEdit

A tokamak contains reacting plasma which spirals around the reactor. Since a high number of reactions per second is required to sustain the reaction in a tokamak, high energy neutrons are released quickly in large amounts. These neutrons are no longer held in the stream of plasma by the toroidal magnets and continue until stopped by the inside wall of the tokamak. This is a large advantage of tokamak reactors since these are very high energy neutrons; the freed neutrons provide a simple way to extract heat from the plasma stream. The inside wall of the tokamak must be cooled because these neutrons are at a high enough temperature to melt the walls of the reactor. A Cryogenics system is used to cool the magnets and inside wall of the reactor. Mostly Liquid helium and Liquid nitrogen are used as refrigerants.[2] Ceramic plates specifically designed to withstand hot temperatures are also placed on the inside reactor wall protect the magnets and reactor.

Experimental tokamaks Edit

Currently in operationEdit

(in chronological order of start of operations)

Previously operatedEdit

  • Texas Turbulent Tokamak, University of Texas, USA; in operation from 1971 to 1980.
  • Alcator A and Alcator C, MIT, USA; in operation from 1975 until 1982 and from 1982 until 1988, respectively.
  • TFTR, Princeton University, USA; in operation from 1982 until 1997
  • CASTOR,[5] in Prague, Czech Republic; in operation from 1983 after reconstruction from Soviet TM-1-MH until 2006
  • T-15, in Kurchatov Institute, Moscow, Russia (formerly Soviet Union); 10 MW; in operation from 1988 until 2005
  • UCLA Electric Tokamak, in Los Angeles, United States; in operation from 1999 to 2005
  • Tokamak de Varennes; Varennes, Canada; in operation from 1987 until 1999; operated by Hydro-Québec and used by researchers from Institut de Recherche en Électricité du Québec (IREQ) and the Institut National de la Recherche Scientifique (INRS)
  • START in Culham, United Kingdom; in operation from 1991 until 1998
  • COMPASS in Culham; in operation until 2001


See also Edit



External linksEdit

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.